ASVIN

ISA Valve Standard

ISA75.02.01
Control Valve Capacity Test Procedures

ISA75.05.01
Control Valve Terminology-Replaces 75.05-1983

ISA75.07
Laboratory Measurement of Aerodynamic Noise Generated by Control Valves

ISA75.08.01
Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300 and 600)

ISA75.08.02
Face-to-Face Dimensions for Flangeless Control Valves (Classes 150, 300 and 600)

ISA75.08.03
Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500 and 2500)

ISA75.08.04
Face-To-Face Dimensions for Buttweld-End Globe-Style Control Valves (Class 4500)

ISA75.08.05
Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Class 150, 300, 600, 900, 1500 and 2500)

ISA75.08.06
Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500 and 2500)-Formerly ISA75.16

ISA75.08.07
Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300 and 600)

ISA75.08.08
Face-to-Centerline Dimensions for Flanged Globe-Style Angle Control Valve Bodies (ANSI Classes 150, 300 and 600)

ISA75.08.09
Face-to-Face Dimensions for Sliding Stem Flangeless Control Valves (Classes 150, 300 and 600)

ISA75.10.01
General Requirements for Clamp or Pinch Valves

ISA75.10.02
Installed Face-to-Face Dimensions for Dual Pinch Flanged Clamp or Pinch Valves (Classes 125 and 150)

ISA75.11.01
Inherent Flow Characteristic and Rangeability of Control Valves

ISA75.13.01
Method of Evaluating the Performance of Positioners with Analog Input Signals and Pneumatic Output-Second Printing