AWWA Valve Standards

AWWA C504-15
Rubber-Seated Butterfly Valves

AWWA C507-18
Ball Valves, 6 In. Through 60 In. (150 mm Through 1,500 mm)

AWWA C508-17
Swing-Check Valves for Waterworks Service, 2 In. Through 48 In. (50 mm Through 1,200 mm) NPS

AWWA C509-15
Resilient-Seated Gate Valves for Water Supply Service

AWWA C510
Cast Iron Sluice Gate Valves

AWWA C512-15
Air Release, Air/Vacuum, and Combination Air Valves for Water and Wastewater Service

AWWA C514-20
Air Valve and Vent Inflow Preventer Assemblies for Potable Water Distribution System and Storage Facilities

AWWA C515-20
Reduced-Wall, Resilient-Seated Gate Valves for Water Supply Service

AWWA C516-21
Large-Diameter Rubber-Seated Butterfly Valves, Sizes 78 In. (2,000 mm) and Larger

AWWA C517-16(R21)
Resilient-Seated Cast-Iron Eccentric Plug Valves

AWWA C518-18
Double-Disc, Swing-Check Valves for Waterworks Service 2 In. Through 48 In. (50 mm Through 1,200 mm) NPS

AWWA C520-19
Knife Gate Valves, Sizes 2 In. (50 mm) Through 96 In. (2,400 mm)

AWWA C530-17
Pilot-Operated Control Valves

AWWA C541-16(R21)
Hydraulic and Pneumatic Cylinder and Vane-Type Actuators for Valves and Slide Gates

AWWA C542-16(R21)
Electric Motor Actuators for Valves and Slide Gates

AWWA C550-17
Protective Interior Coatings for Valves and Hydrants

AWWA C800-21
Underground Service Line Valves and Fittings

M44
Distribution Valves
Selection, Installation, Field Testing and Maintenance - Third Edition

M49
Quarter-Turn Valves
Head Loss, Torque, and Cavitation Analysis - Third Edition

M51
Air Valves
Air Release, Air/Vacuum, and Combination - Second Edition